3 replies to this topic

[Sickest_tm7]

So, I'm not sure how many people have actually got out there and used the new board yet. But I've now put through about 2 cases on it with my tm7. The only setting I chamged was the bps is set to max. Everything else is the same as from the factory. My tank is a pure energy 70/4500 with a myth reg. The field I played at didn't have a compressor, so I was only getting the amount the tanks would put out. On average, I was running about 2000 psi. While out on the field, I noticed a significant drop in the efficiency with the ape board over the stock. I was able to get about 1 hopper, and 2 pods if I was lucky. Most of the time it was a hopper and a pod and a half, and my shots started dropping... Any one else have this issue? Any ideas on how to change it? The internals on the tm7 are stock. I lowered the dwell from 15 to 10. I'm hoping this helps a little. I'm not sure how this will effect the gun though until next weekend... Any help would be great! Thanks!

[bvdave]

apparently a few people are having this issue, I know some of us will be playing with the settings on the board to try and find a general guideline for programming the board properly and will have it posted when weve got it figured out, I know theenglishguy is looking into his and when I get some free time im going to be doing the same with mine.

[TheEnglishGuy]

Check my thread in the TM-15 Upgrades section.  I was able to get my psi down to 180 and my dwell down to 4 and still get 260-280fps.  However, I would recommend that you DON'T make any changes to the Advanced Settings section, as that appears to have messed up my selector switch options on both my TM-7's.

Once I fix that I'll duplicate my previous efficiency tests and see it it's working better.

English

[Sickest_tm7]

I'm glad to see I'm not the only person with this issue. I'll check the tm15 section. I hope that works for me. 180 with a dwell of 4 sounds amazing! Thanks for the info everyone.