0
Its me ram and i will show you now how to mod an A5 Opsgear UMP shroud that it fits on an BT-4 Assault.
At first i hope you can understand me and sorry for the distance data. They are in cm and mm (Europe), sorry i dont know what they are in inch.
Quote
Edited by Tomcat: 2.54cm per inch mate!
For the mod you need
-a drill with 8mm metal
10_07_08_1344.jpg 66K
153 downloads-a dremel with a file and a diamond saw blade
dremel500.jpg 14.54K
69 downloads-and a jig saw
10_07_08_1338.jpg 37.01K
79 downloadsBefore you cut, take a pen and make a line where you want to cut and file after all cuts
10_07_08_1332.jpg 17.19K
204 downloads1) Get the weaver rails off, you can mod it later
2) Cut here
01_1.JPG 46.8K
358 downloads
01_2.JPG 39.09K
318 downloads3) Cut here
02_1.JPG 39.58K
221 downloads
02_2.JPG 37.31K
203 downloadsYou have to take the little distance metal when its broken out
02_3.JPG 37.08K
312 downloads4) File here
03_1.JPG 79.92K
526 downloads5) Cut here
04_1.JPG 58.85K
331 downloadscut here with dremel or you can file it out
04_2.JPG 61.66K
208 downloads6) now its a little bit difficult, the numbers are there that you know where you have to cut, the distance between two green lines
05_1.JPG 81.11K
330 downloads
05_2.JPG 78.55K
312 downloads7) with the shroud comes a (long) screw, which you need. Also you need a compatible nut and the the distance metal piece (you have cut out)
06_1.JPG 39.16K
289 downloads
06_3.JPG 31.24K
327 downloads8) the weaver rails, you can mod it easily with a metal saw
10_07_08_1329.jpg 34K
398 downloadsIf somebody wants to mod an UMP shroud, i hope he can do it now
When you have a question, of course you can ask me everytime
r 
