Jump to content


Photo
- - - - -

TM7 Violent Series Invert Mini Trigger Mod


  • Please log in to reply
48 replies to this topic

#1 Kallecall

Kallecall

    Private First Class

  • Member
  • Gender:Male
  • My BT Products:Delta Elite | TM-7
  • I am BT BATTALION Member number:11525

Posted 07 May 2009 - 12:09 PM

Because the BT double trigger doesnt really satisfy´s me I looked for an alternativ trigger. In a painballmagazine I found an ad about the Violet Series Invert Mini trigger and thought this might fit!

And there it is! Syntetic material and ball bearing mounted . Nice and light. Including allen wrench, sticker and magnetic return magnet.
Posted Image

The Violent trigger compared to the BT double trigger.
Posted Image

I opend the TM7 and set the trigger. The diameter of the pin, the position of the magnet and the length in the BT double trigger frame fits just right.
Posted Image

The original spring should stay in because it holdes the modeswich in position.
So, I measured the diameter of the magnet return magnet. Find the right position on the frame and drilled the little hole.
Posted Image
Posted Image

Fit´s!
Posted Image
…Fit´s to good. Actually I planed to drill the hole a little smaler so that I could press the magent in. But it was not to much. Superglue does the job, too!
Posted Image

Holds!
Posted Image

The trigger had with the closed shells a bit of space on the axle. So I set a 1mm wide ring washer on the left side. The washer could be a little wider but 1,6mm was to much. The trigger couldn´t be moved any more. The 1mm is fine for now. If I find a differend one. I can set it there, later. Tolerance lol
Posted Image

TM7 mounted together, adjusted the trigger, ready!
Posted Image
Posted Image

Now I can trigger her really smooth and fast. :grin2:

Hope you like it!

Posted Image
Battalion Membership Number: 11525

#2 Hawkeye

Hawkeye

    Corporal G2

  • Kee Employees- KAS -
  • Gender:Male

Posted 07 May 2009 - 12:19 PM

Nicely done!

#3 Sig07

Sig07

    Captain

  • Donator
  • Gender:Male
  • My BT Products:BT TM-15, BT Merc Vest, BT Rip Clip
  • I am BT BATTALION Member number:11809

Posted 07 May 2009 - 12:27 PM

Very nice mod. I might just do this for my Delta. :)



Batallion # 11809

#4 Canascar

Canascar

    General

  • Donator
  • Gender:Male
  • My BT Products:BT Combat (Modified), TM15, TM7 and a TM15 w/Soggy Mod #8.
  • I am BT BATTALION Member number:11410

Posted 07 May 2009 - 12:30 PM

Looks good bro, nice looking marker. Reminds me alot of mine.
Posted Image
Batalla probado , siempre dispuesto
Proud Icecream member #42
Sponsored by BT Paintball Designs KEE Action Sports Flasc Paintball

#5 bvdave

bvdave

    General G2

  • Donator - Global Moderator
  • Gender:Male
  • My BT Products:TM-7 Primary, TM15 backup and Bt4 Loaner X2. Both rip clipped, full set of Bt clothing + loaded merc vest. Empire gear bag and Goggle case
  • I am BT BATTALION Member number:12751

Posted 07 May 2009 - 01:05 PM

how does it shoot?
Posted Image
Proud Sponsor of the 101st BT Rangers Canada

#6 Kallecall

Kallecall

    Private First Class

  • Member
  • Gender:Male
  • My BT Products:Delta Elite | TM-7
  • I am BT BATTALION Member number:11525

Posted 07 May 2009 - 02:19 PM

how does it shoot?



Will see it on saturday. But I dry triggered with air a little bit and she works really nice and fast with the new one...
Battalion Membership Number: 11525

#7 robertseakykr

robertseakykr

    Global Moderator

  • Donator - Global Moderator
  • Gender:Male
  • My BT Products:BT-4 SWAT, BT TM7, e-bolted BT bullpup

Posted 07 May 2009 - 02:39 PM

Very nice!!

#8 SGTJBlaze

SGTJBlaze

    General

  • Member G2
  • Gender:Male
  • My BT Products:BT-4 Assault, BT Rip Clip.
  • I am BT BATTALION Member number:11141

Posted 07 May 2009 - 02:44 PM

Nice little mod and it gives your marker a different look. Let us all know how she performs on the field for you when you get a chance to test it out. :D

Posted Image
BT BATTALION NUMBER 11141


#9 Special Ed

Special Ed

    Corporal G2

  • Member G2
  • Gender:Male
  • My BT Products:None Yet

Posted 07 May 2009 - 02:49 PM

That looks great, now to make a larger trigger guard.

#10 Kallecall

Kallecall

    Private First Class

  • Member
  • Gender:Male
  • My BT Products:Delta Elite | TM-7
  • I am BT BATTALION Member number:11525

Posted 07 May 2009 - 02:55 PM

Jep, can´t wait to test it
Battalion Membership Number: 11525

#11 Dorian Feyd

Dorian Feyd

    Contributor

  • Donator - Global Moderator
  • Gender:Male
  • My BT Products:BT clothes
  • I am BT BATTALION Member number:12709

Posted 07 May 2009 - 03:27 PM

Nice mod! I think CP is doing an aluminum trigger also. Feyd...............
Dfeyd11.gif

#12 Salomon

Salomon

    Corporal

  • Member
  • Gender:Male
  • My BT Products:Delta

Posted 07 May 2009 - 04:54 PM

AWESOME!
Can this be done to a BT-4?
Posted Image

My eBay Feedback
My BT:WO Feedback

Selling a BT Delta Elite! Message me or check it out in the BST!

#13 cdnmustang

cdnmustang

    General G2

  • BT Ranger - Canada
  • Gender:Male
  • My BT Products:banshee, ripclip x2, egrip, apex, delta elite, bt4 rental, tm15, merc vest with bt accessories, combat pants and jersey

Posted 07 May 2009 - 06:07 PM

awesome stuff bud, looks like that trigger guard is made for that trigger
Posted Image
Sponsored by BT Paintball Designs KEE Action Sports
Official Ice Cream Member #4

#14 Guest_SOGsnakebite_*

Guest_SOGsnakebite_*
  • Guests

Posted 07 May 2009 - 06:09 PM

Awesome mod bud

#15 Flave

Flave

    Corporal G2

  • Member G2
  • Gender:Male
  • My BT Products:ERC, TM7

Posted 07 May 2009 - 07:21 PM

WOW NICE JOB MAN. GOING TO DO THE SAME TO MINE. THANK YOU SO MUCH
A+++++++++++++++++++ FROM ME

#16 Kallecall

Kallecall

    Private First Class

  • Member
  • Gender:Male
  • My BT Products:Delta Elite | TM-7
  • I am BT BATTALION Member number:11525

Posted 08 May 2009 - 08:48 AM

AWESOME!
Can this be done to a BT-4?


I don´t think so! Because it is a total different technique...

But for the BT-4/Delta you can get the BT-4 Egrip. Thats the same one which comes with the BT Delta Elite. There is no modification needed. I have that one on my Delta Elite and it runs like a sportscar...

Posted Image
Battalion Membership Number: 11525

#17 Kallecall

Kallecall

    Private First Class

  • Member
  • Gender:Male
  • My BT Products:Delta Elite | TM-7
  • I am BT BATTALION Member number:11525

Posted 10 May 2009 - 06:25 AM

Let us all know how she performs on the field for you when you get a chance to test it out. :D



So, I had the chance to play and make the fieldtest yesterday. With 500 paints, tm7 and the gear which I needed in the bag I made my way to the PB field. Actually I just wanted to make the testing and make my way back home. BUT, she performs so well and it made so much fun that I had to buy more paintballs. Now I can push the epneu to its limits.The reason why I was looking for an high performace trigger is that the TM7 comes here in semi only.
Battalion Membership Number: 11525

#18 SWATman

SWATman

    Corporal G2

  • Member G2
  • Gender:Male
  • My BT Products:Waiting to get a TM-15

Posted 10 May 2009 - 12:48 PM

nice mod dude. glad to hear that it is working good

why is it semi only? our field wont let it on otherwise or thats all you like shooting and got it to stay n semi only?
Gear:
starting from scratch again...

#19 Kallecall

Kallecall

    Private First Class

  • Member
  • Gender:Male
  • My BT Products:Delta Elite | TM-7
  • I am BT BATTALION Member number:11525

Posted 10 May 2009 - 01:36 PM

why is it semi only? our field wont let it on otherwise or thats all you like shooting and got it to stay n semi only?



PB markers in Germany only allowed to work in semi automatik mode. And to use the TM7´s potential you´ll need a good trigger. The BT doubble trigger does its job, but I like the Violet Series trigger much much more...
Battalion Membership Number: 11525

#20 The_Original_Modifier

The_Original_Modifier

    Modder

  • Member G2
  • Gender:Male
  • My BT Products:Chimera
  • I am BT BATTALION Member number:12642

Posted 10 May 2009 - 02:11 PM

Nice work, well done!


Mod :grin2:
Ice Cream member #1




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users