4 replies to this topic

[TheNewGuy7000]

Hello everyone can anyone tell me if the k36 rail will fit on a bt delta I keep getting mixed answers. Has anyone tyred it, can you mod it to fit? I really like the style is love to have it on my delta. It says on other sites it's 12 inches long, are there any shorter?

Here is a link so you can further see what I'm talking about.

http://www.rap4.com/...-k36-sight-rail

[side-effects]

Judging by the picture, the T68 will have a similar body length to a Delta. So even if you slide it all the way to the back of the marker it is still going to overhang the barrel by 3-4 inches. I would say no unless you are going to switch the barrel shroud to a RIS style like in the picture.

[TheNewGuy7000]

If its all metal I should be able to cut it shorter and weld it back on and clean it up right?

[side-effects]

Yup for sure. You would have to cut the front a bit to leave enough room for the feed neck or ripclip to fit in the opening anyway.

[Jaz]

I have one of those rails and I use it on my tm7

I looked at it last night and for sure it will not fit on a delta, however if you do want to cut it to fit make sure you reposition the indented portion of the rail to coincide with your hopper input or else you won't be able to put a hopper on effectively. I do know that when you put a rip clip on with that rail it clears it fine regardless of feed position.   The rail clears the rip clip with about 1/2-3/4 clearance to spare.

On a side note, this metal one is so much better than the plastic one from tippman