135 replies to this topic

[G Wood]

stock...

[RDY-BT4-ERC]

First thing i got for my ERC

Was a lapco bigshot apex-ready barrel 12" (good difference in range and accuracy)
the stock one for the apex is not too good.

[Roost3r117]

After buying my combat I went and got myself the Rip Clip! woot!

[Defective Donor]

When I bought my Swat, which is my first marker ever!, I bought a 14" American barrel(I think that is the brand), a rip clip and a low profile hopper.
I just recently bought a larger HPA tank ( ) and a remote coil.

I am looking for a good deal on an offest picatinny rail and reflex scope and a M-16 barrel.

One question though, will I be able to actually see thru the reflex scope with my mask on if its on a 45 offset rail.

[neary--]

Definitely a barrel, the stock one is terrible.

[BT Beast]

One question guys, will an apex fit on the stock assault barrel?

[William]

i have BT4 combat runs on 20oz, thinking about upgrading it. i just polished the internal today, going to get this zero kick hammer, remote link and then an expansion chamber (do i really need that?)

for barrel, what do you guys think about this 7/8 Inch Diameter 18 Inch Recon Barrel with grooves and lands in the bore?

for silencer, do they really works or just for looks?

for rear velocity adjuster, am i really need that? if so, what good about it? can I still add a stock if i have a rva?

thank you for helping!

[Tomcat]

William, on Jul 16 2009, 03:14 AM, said:

.... and then an expansion chamber (do i really need that?)

No.  Not really the remote coil will help but try to go to air asap.  More consistency than CO2.

William, on Jul 16 2009, 03:14 AM, said:

for barrel, what do you guys think about this 7/8 Inch Diameter 18 Inch Recon Barrel with grooves and lands in the bore?

Over 14" your wasting efficiency in your marker.  Rifling does not do anything for the paint nor does it increase accuracy - all gimmick.  A smooth bore barrel can be use that is over 14" but it is more for show than performance.

William, on Jul 16 2009, 03:14 AM, said:

for silencer, do they really works or just for looks?

No they are for show.  A silencer that really works might be a legal issue.  Depending on the Country/State you live in.

William, on Jul 16 2009, 03:14 AM, said:

for rear velocity adjuster, am i really need that? if so, what good about it? can I still add a stock if i have a rva?

No you don't "really" need it.  IF you play speedball, it might be an option to consider, however if you play in the woods, a stock might be a better choice.  No you can't run a stock with the RVA.  Its one of the other.

Hope that helps.

Now lets bring this subject back to topic.

[William]

thx tomcat, that really clear alot of questions.
you say change to air, should i get an air regulator too?

what do i do to get my marker to improve its acccuracy while playing in the woods??

[Tomcat]

The regulator comes with the Air/N2 tank.  You don't need another reg.  CO2 tanks don't come with regs that's why you here some people talk about getting them.  I use a 72ci/3000psi PMI tank.  I replaced the reg with a Guerrilla "Myth" high pressure reg.  It helped to reduce some weight.  

For accuracy I'd say convert to air and PRACTICE!  Go out and play more.  That's all.

I use these barrels and most are the BT M16 14" barrel.

[coolit092]

ya i want to get the evolution, it would be my first upgrade so thats what i put

[HappyValley]

Barrel, 14 inch smart parts, should have bought the CP 14 incher instead.

[DonMoose]

First upgrade for my BT4 Assault: EGrip and RipClip.

[sameagol26]

The rip clip was my first real good upgrade! Then a BT4 M4 mag, go figure!!! Lol, I should have bought a new barrel but i never got around to that. I sold my Delta after a few months.

[reddevil999]

First upgrade for my BT4 delta elite (apex,rip-clip, e-grip and nice look) remote line and 90" 4500psi nija  extra pod and ape

[ReeceDavison]

I got the m16 stock and m16 clip